Marantz SR7010 Vs SR7011

This article will help you understand the differences between Marantz SR7010 vs SR7011and choose the best AV receiver for the money. Choosing between the two models may be quite confusing at first, as they come with many similar features. However, after careful comparisons, the decision is not as complicated as you think.

In the following article, we will answer your questions regarding:
– The differences of Marantz SR7010 vs SR7011 in terms of features,
– Which one is the most up to date model, and
– Which one offers the best value for the money.

Design and Dimensions
In terms of design and dimensions, Marantz SR7010 and Marantz SR7011 are very similar. If not for their names which are written on their front panels, you will not be able to tell the two apart. Each measures 17.3 inches wide, 16.2 inches deep, and 9.7 inches tall with a weight of about 30.4 lbs. See also: Onkyo TX RZ900 vs Marantz SR7010.

On the front side of each model, you can find a small circular display with a blue halo light surrounding it. There are also two control knobs on the left and right of it, one for input selection and the other for volume. The actual panel which has the full display, ports, and complete controls is hidden behind a cover. The USB port is put on the front, so you can easily connect a flash drive, smartphone, or tablet.

Connection Ports
In terms of connectivity, Marantz SR7010 vs Marantz SR7011 are also very similar. They both are equipped with various connection ports for different inputs and outputs. Each of them is a 9.2-channel platform with dedicated pre-outs for Zone 2 and Zone 3. As mentioned above, each has a USB port placed on the front. Both models support HDMI 2.0 with 8 inputs and 3 outputs.

However, there is a minor difference. Marantz SR7010 has 13.2-channel pre-outs, with dedicated pre-outs for front wide speakers. Even so, you can’t use all the pre-outs at the same time, as this model can only process up to 11.2 channels simultaneously.

Marantz SR7011 only has 11.2-channel pre-outs. It has omitted the dedicated pre-outs for front wide speakers. But this is not a big problem, as it is able to process all the 11.2 channels simultaneously.

These AV receivers are ready for networking. They each have an Ethernet port on the rear. This is very handy if you need to connect your AV receiver to your home network using a LAN cable. However, most people prefer to use the wireless connectivity options. Both Marantz SR7010 and Marantz SR7011 already support Bluetooth and Wi-Fi.

Multi-Room and Wireless Streaming
So far, Marantz SR7010 and Marantz SR7011 do not have a significant difference. But they do have an important difference regarding multi-room and wireless streaming. Marantz SR7010 has an issue with multi-room streaming. This model only allows Airplay to go to Zone 2 and Zone 3 after hijacking the main zone first. After Airplay goes to Zone 2 or Zone 3, you can re-select the main zone or leave it turned off.

Marantz SR7011 has apparently eliminated the issue. In addition, Marantz SR7011 now comes with the HEOS wireless streaming technology. By becoming a part of a multi-room system, Marantz SR7011 can connect wirelessly to other HEOS speakers and HEOS-enabled receivers. This way, you can create a seamless multi-room system. Simply open the HEOS mobile app on your smartphone, and select a music track from various integrated sources. The music will be streamed to all receivers and speakers in different rooms.

Power and Sound Quality
Marantz SR7010 and Marantz SR7011 are similar in terms of power. They each have 125 Watts rated power output per channel. Each has 9 amplifier stages, so they can run 5.1.4 Dolby Atmos speaker setups without needing any external power amp. However, if you want to run a 7.1.4 speaker setup, you need an external amplifier with at least two channels.

Both models use 32-bit/192kHz digital-to-analog converters for the best sound quality. They both support FLAC and WAV formats up to 24-bit/192kHz. Marantz SR7010 supports the DSD format, but it is limited to 2.8MHz. According to Wikipedia, DSD is a system created by Sony and Phillips for recreating audible signals from Super Audio CDs.Marantz SR7011 supports the DSD format with sample rates of 2.8 MHz and 5.6 MHz.

Audyssey Calibration
The next difference between Marantz SR7010 and Marantz SR7011 is regarding the Audyssey calibration feature. Marantz SR7010 comes with MultEQ XT32 (Pro), whereas Marantz SR7011 uses MultEQ XT32 without the ‘Pro’.

At first, Marantz SR7010 may seem to come with a more advanced version of Audyssey, but this is not true. This simply means that Marantz SR7010 can work with the Audyssey Pro Kit, which is quite expensive. But it cannot work with the new Audyssey app.

On the other hand, Marantz SR7011 comes with a new version of AudysseyMultEQ XT32 which supports the new AudysseyMultEQ Editor app. It has a similar EQ curve editing functionality, just like the Pro kit. In addition, it is much easier to use and also more affordable.

DSX Processing
Marantz SR7010 makes use of the Audyssey DSX processing, which brings new channels to create more immersive surround performance. This technology specifically uses the front height channels or the front wide speakers or both.

Unfortunately, Marantz SR7011 has dropped the Audyssey DSX processing technology and does not support it. This is because the AV receiver no longer has pre-outs for front wide speakers. But this is not a big issue, unless you really prefer to use the technology.

Dolby Atmos and DTS:X
Marantz SR7010 supports Dolby Atmos right out of the box, but it is only DTS:X ready. In other words, it requires a firmware update in order to fully support DTS:X. On the other hand, Marantz SR7011 already supports Dolby Atmos and DTS:X right out of the box, so this is very convenient.

Marantz SR7010 Vs SR7011

NameMarantz SR7010Marantz SR7011
NameMarantz SR7010Marantz SR7011
Features- 9.2ch platform with 13.2ch Preout - 125W(8ohm, 20Hz-20kHz,THD:0.05%) Power Amp - HDMI 2.0 - 8 inputs / 3 outputs - 4K/60Hz full-rate pass-through and HDCP2.2 - Dolby Atmos, dts UHD and Auro 3D upgradability- 9.2 channel A/V Receiver with 125W per channel (8ohm, 20Hz-20kHz,THD:0.05%) with 11.2 channel processing - Built-in HEOS Wireless Multi-Room Audio Technology. Free Remote App for iOS, Android and Kindle Fire. Eco Mode
Ratings3.8 out of 5.0 stars4.0 out of 5.0 stars
Price

Best dealSave Money Please click hereSave Money Please click here

NOTE : Product prices, availability, ratings and save money information are accurate as of the date/time indicated on post time (as seen right bellow the tittle) and are subject to change. Any price, ratings, availability and save money information displayed on Amazon Site at the time of purchase will apply to the purchase of this product.

Conclusion
Between Marantz SR7010 vs SR7011, we recommend you to choose Marantz SR7011. This is an updated AV receiver with newer features and technologies. It comes with HEOS and is compatible with the new AudysseyMultEQ app. It also supports Dolby Atmos and DTS:X right out of the box.

Leave a Reply

Your email address will not be published. Required fields are marked *

ten + 5 =