Denon AVR-S510BT Vs Yamaha RX-V379

Denon AVR-S510BT and Yamaha RX-V379 are available in the same price range, as they each is available for a budget under three hundred dollars. Yet, more often than not, you will find that Denon AVR-S510BT being a little bit more expensive than Yamaha RX-V379. So, what are the differences between the two products? Continue reading to find out!

Denon AVR-S510BT Vs Yamaha RX-V379

Output and Performance
Perhaps one of the differences between these two products that people often overlook is that Denon AVR-S510BT is a 5.2-channel AV receiver while YamahaRX-V379 is a 5.1-channel AV receiver. Depending on how you use them, the difference may or may not cause significant effects on the output and performance. (See also: Denon AVR-S500BT Vs AVR-S510BT)

With Denon AVR-S510BT, you will be able to integrate five speakers and two subwoofers into your audio system. On the other hand, Yamaha RX-V379 can only accommodate five speakers and one subwoofer. However, in terms of amplification power, the two products are largely equal, as they are both 70-Watt. If you are ready to get two subwoofers, Denon AVR-S510BT can deliver fuller and more solid bass. Such configuration may be an overkill for a small-sized room, though. If you only use a single subwoofer, then Denon AVR-S510BT and Yamaha RX-V379 perform quite identically. Each of them has a frequency response range of 20 Hz – 20 kHz and an impedance of 6 ohms.

Neither of them has built-in Wi-Fi, but they both feature built-in Bluetooth for easy data transfer and integration with your mobile devices. These AV receivers are both marketed for the 4K Ultra HD full-rate pass-through and HDCP 2.2 support. Hence, you can put yourself at a little bit more ease now. These AV receivers both can play premium-quality 4K Ultra HD content without any problem. They are both also supported by Dolby technologies, including Dolby TruHD and DTS-HD Master Audio. They each also comes with built-in automatic calibration feature.

However, only Denon AVR-S510BT that supports HDMI Standby Pass-Through, which means that you can still send signals to your TV from connected sources like a cable box or game console without turning the receiver on. This is a handy feature, as you certainly don’t always want to turn the receiver on only for simple and quick activities.

As mentioned before, neither has Wi-Fi, but both have Bluetooth. Yamaha RX-V379 comes with more ports available, with 7 AV inputs, 3 audio-only inputs, 1 optical digital input, 2 coaxial digital inputs,4 HDMI inputs, 1 HDMI monitor output, and 1 subwoofer output. On the other hand, Denon AVR-S510BT has 5 AV inputs, 1 audio-only input, 2 optical digital inputs, 1 coaxial digital input, 5 HDMI inputs, 1 HDMI monitor output, and 2 subwoofer outputs.

Denon AVR-S510BT Vs Yamaha RX-V379

NameDenon AVR-S510BTYamaha RX-V379
NameDenon AVR-S510BTYamaha RX-V379
Features- 5.2 channel A/V Receiver with 70W per channel - Built-in Bluetooth - Dolby TruHD, DTS-HD Master Audio - IP control capability with the HEOS Link turns any stereo system into a wireless zone- Bluetooth wireless music playback - 4K Ultra HD pass-through with HDCP 2.2 - YPAO microphone audio calibration - Virtual Cinema Front - Extra Bass setting for smaller satellite speakers
Ratings4.2 out of 5.0 stars4.2 out of 5.0 stars

Best dealSave Money Please click hereSave 23% Please click here

NOTE : Product prices, availability, ratings and save money information are accurate as of the date/time indicated on post time (as seen right bellow the tittle) and are subject to change. Any price, availability and save money information displayed on Amazon Site at the time of purchase will apply to the purchase of this product.

In general, Denon AVR-S510BT indeed has the better value here. In real-life usage, the HDMI Standby Pass-Through capability will be the most beneficial advantage, though the extra subwoofer channel can be a nice addition as well.

Leave a Reply

Your email address will not be published. Required fields are marked *

twenty − nine =